![]() On eCatcher side, after having connected the eWON, you must add routes manually to the PC with the command ROUTE ADD.ġ. The static routes table gateway corresponds to the router WAN IP which has to be within the same range as the eWONs IP address.įor a Cosy, you need to edit the advanced COM parameters ( ) Router2 WAN IP address for Machine LAN 2: 192.168.2.4 Router1 WAN IP address for Machine LAN 1: 192.168.2.3 See attached eWON static router configuration picture for the example below. ![]() On the Flexy, navigate to Setup>System>Communication>Networking Routing>Static routes tables ![]() Step 3: On eCatcher side, after having connected the eWon, you must add routes manually to the PC with the command ROUTE ADD. Step 2: Configure the static routes table in the eWON Step 1: Use a router for each different LAN network and ![]() These are the steps to connecting multiple LAN networks. The eWON is designed by default to work with only one LAN network, however to allow connection to more than one LAN network, connection to a router is required to provide a gateway to the additional network.
0 Comments
Leave a Reply. |